fitting A cat flap cost flap (www.metooo.es) can seem intimidating, but it is fairly simple with the right instructions. First, determine the height you want the cat flap to be (on average the belly height). Mark this point on the door and then use the template provided as a reference to drill.

If you have a kitten who is still a newborn then gently prop the door slightly open and allow it to walk through. Reward it each time it goes through.

Take a measurement of the door

A cat flap is a wonderful method to allow your pet to leave and Fitting a cat flap come into and out of your home whenever it pleases. This will help keep your cat healthy by ensuring that it is getting exercise as well as being able to go back in if stuck outside in bad weather, particularly during the winter. This can reduce the time you have to let your cat in or out, and keep your home secure by notifying you when it's left.

However, it is important that the flap on your cat is fitted correctly to prevent your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). It is important to measure the height of your pet's stomach and the height of the doorway in your home to ensure that the flap is at the correct height. You can alter the height of your flap if your cat is taller or less than the average.

The next step is to make use of a spirit level to mark the center of the door where you will be installing the flap. Then, using the marks as a guideline, cut out the contour of the flap on the door with the aid of a jigsaw. After you've cut the area, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes that are needed.

Fitting a cat flap should not take more than two hours. The process is a bit more difficult if you have to install it in the form of a uPVC door or composite one. This is because composite doors are available in various thicknesses, which could affect the way the holes are cut. We always recommend to contact a professional for your first time working with glass.

Measure Your Cat

You can avoid hours of ignoring the cat's meows to be allowed in or out. This is especially helpful if you are at work most of the day and your cat has to stay in the waiting room until you come home in any weather.

If you want to fit a cat flap in your door it is important to take measurements of your cat prior to attempting the task. It might appear to be a simple task, but it is crucial to get the measurements right. In the event that you don't, your cat might find it difficult to use.

Firstly, make sure your cat is relaxed and not anxious prior to taking the measurements. You'll need to hold them in a way that they cannot move and make sure that the measuring tape or ruler is flat against their body, not arching in any places. By keeping the measuring tape or ruler against their body from their head to the bottom of their tail will allow you to determine an accurate measurement.

Once you've determined your cat's measurements then you can examine the door to determine the best place to place the flap. It is advisable to position the flap at the height of your cat's belly as this will help them to pass through it without too much effort. This will also stop the flap making a lot of noise as it swings open and closed.

You will need to consider the thickness of the upvc door panels cat flap or composite door too. While all timber doors have the same thickness, uPVC or composite doors can differ greatly in their overall structure. This could make the process of fitting a flap for your cat more difficult since you have to make sure that the hole is of the correct size.

You can make use of the template included in the instructions to mark the location of the opening on the door. This will enable you to determine where the hole needs to be located and make sure that the template is set properly on the door. It is also a good idea to utilize a spirit-level to make sure that the template is placed flush against the door.

Cut the Flap

Before you can put in your cat flap, you'll must cut the door panel to create a space large enough to accommodate it. It can be a difficult job and it is recommended that you engage a professional to help you if you lack the knowledge or skills. You can also consult the instructions included with the kit to discover how to do it properly.

You can take the height of your cat's or kitten's stomach as a guide. As a rule of thumb put the flap about 10-15 centimeters above the ground. This is the average height of the stomach for cats. This way, your cat will be able to go through the flap comfortably and will also make other cats or snooping neighbours a tough time trying to get in or out.

Draw the location of the cat flap on the door using a pencil. Next, if your kit comes with a paper template, lay this over the door and use the marks to drill holes into each corner of the template. You should then be able to cut the shape of the template and replace it with your cat flap.

You can install your cat flap yourself inside an uPVC or wood door If you're comfortable with the use of a Jigsaw. Be sure to not cut into any of the door's mullions, or vertical rails. You can use a jigsaw cut the panel into a circle or square according to the design of your cat flap. Make sure to take your time and don't make the jigsaw cut faster.

Once the hole has been cut, carefully place your cat flap in its new place of residence. Make sure it is solidly secured. If the flap is fitted with screw caps then push them into the protruding bolts. Once the screws are in place, sand the rough edges of the cut and then seal any gaps to ensure that there aren't any draughts entering into your home.

Place the Flap

If you have a simple window cat flap flap, you can leave it open and encourage your pet to walk through by putting a little bit of cat food on the outside of the door. You can also push the cat with the help of a stick or your hands. Once your cat is accustomed to moving through the flap, it should be able to go in and out as it wishes and you should be able to let it in or out without keeping the door open for it all day (and possibly in all weathers).

You can install the flap onto the UPVC or glass doors however it's not quite as straightforward as fitting one into a wood external door because the UPVC and glass doors aren't a uniform thickness. This can have a major impact on how you cut the flap's hole, and whether the flap will fit correctly after installation.

The mounting kit might contain a template that outlines where to drill holes. If the kit does not include a template you can create one on your own. It's important to not press the jigsaw too hard when cutting, so it doesn't leave a bigger than needed hole in your door.

The majority of cat flaps are rectangular or square in shape, however there are some that are circular and these are typically more difficult to place. If you have a round flap, make sure that the hole is located in the right place on the door. In the event that it is not, the cat may not be able to access it, and may be outside all day (or at night).

Certain models of cat flaps have locks that let you manage when your cat comes and goes. These are useful for pets who are afraid of going out in the dark, or coming back to the house at night. They can also be helpful for those who work all day. Some locks can be used for entry or exit, and others can be locked both ways. This is beneficial for older cats or sick cats who aren't keen to venture out in cold weather.