UPVC Door Handles Replacement Guide

Replacing upvc door handles is a straightforward DIY project when you have the right measurements. These measurements include the distance from the handle's backplate mounting centres (sometimes called PZ) to the center of the keyhole.

The most common kind of uPVC door handle comes with two levers inline, one internal and one external connected by spindle. They operate the multipoint lock that is found on uPVC and aluminium doors, and also on some wooden doors.

Brands & finishes

A damaged uPVC door handle can be more than an inconvenience. It could also leave your home vulnerable to burglars who might be able force open the lock and escape into your property. This is why it's crucial to recognise the moment your uPVC door handles are beginning to break down and take action as soon as you can.

Fortunately, it is quite simple to replace your uPVC door handles. You will only need some tools and a few accurate measurements. In the majority of instances, you'll need to screw in your new uPVC handles and you'll be good to go. It's always best to choose locks and handles that are of the highest standard of security.

There are a number of different types of uPVC handles available that you can choose from. These include lever/lever, pad, offset and snib handles. Lever/lever handles, which consist of two inline handles which can be moved are a favorite among homeowners. Pad uPVC handles are smaller in size, and typically have an offset design that allows you to keep the outside of your property secure after entry.

A uPVC offset handle is comprised of two pads one fixed and the second one movable. This kind of handle is usually used on sliding patio doors. Snib handles are similar to offset handles but can be used on uPVC french doors.

It's important to consider the style of your current doors and windows when choosing the replacement uPVC handle. The handle should be in line with the colour and finish of your doors. Some handles come in a range of finishes that include black and white and others are available with more fashionable options such as gold or chrome.

It is important to get your screw-to-screw and PZ measurements correct when you're taking measurements. The PZ measurement is the distance from the centre of the spindle hole to the center of the keyhole. The screw-to-screw dimension is the distance between the screw hole on your current handle and the nearest screw on the door frame, and it is crucial to measure it accurately to identify a suitable replacement.

Measurement and Fitting

The uPVC handle is equipped with two levers - one on either side of the lock mechanism that make it easy to operate from both inside and outside. Offering a comfortable grip as well as strain-free functionality handles are an essential part of the door's security mechanisms. With the proper uPVC handles, you can ensure that your door is safe and stylish while doing it.

Selecting the right uPVC handle can be difficult and confusing because there are many different sizes, shapes and designs on offer. However, there are three key measurements to take into consideration when choosing a replacement for your uPVC doors. These are the backplate fixing centres key hole, lever and lever dimensions, and the spindle's diameter. Incorporating these factors will ensure that your new handle is compatible with your uPVC door and is an perfect fit.

It's simple to measure these points but you need to be as accurate as you can. You may end up with a handle which doesn't fit correctly and causes problems when opening your uPVC doors. The most important measurement is the top screw on the backplate fixing centre, often known as the PZ size. This is the distance between the axis or handle lever of the keyhole and the central point of the screw. In general this is a measurement of 92mm but it could vary.

Also, make sure that your uPVC door handles have the required number of keyspindles to operate your multi-point locking system. Ideally, these should be the same as the number of keys that you use to lock and unlock your uPVC doors. Some older doors may have only one spindle to operate the lock, whereas more modern doors will feature two spindles, allowing for independent operation from inside and out.

It is not advisable to have a sagging uPVC handle as it can put an excessive stress on the locking mechanism. This could lead to broken parts. You should look for uPVC handles that have spring cassettes built-in to prevent this. They are not only visually pleasing, but they can also help give your door locking mechanism a longer span by removing some of the operating force.

Broken Spring Cassettes

If a door handle gets stiff, it is usually caused by a fault within the tubular latch itself. It is usually a simple fix and can be resolved by repositioning internal fixing plates of your replacement handle. First open the door and ensure that there aren't any obvious obstructions to the latch plate, such as loose screws or evidence of internal parts peeking through. If this isn't the case, it could be one of the spring cassettes inside your uPVC handle that may need to be relocated.

The most efficient method to accomplish this is to purchase a door handle repair kit. It will contain all the tools needed to remove the handles and then put them back in their cassettes. Follow the directions and you will soon have a sagging / drooping uPVC handle that is fully operable.

A loose uPVC door handle could be the result of thermal contraction, but is more commonly a sign that the gearbox inside is broken. This isn't a problem that can be fixed at home, and requires the assistance of an expert locksmith.

If you do need to replace the gearbox on your uPVC door, make sure you use an authentic replacement that will ensure that everything is fitted correctly. Using a cheaper aftermarket part could cause issues like a malfunctioning multipoint lock, and less security for your home.

Another option to consider is replacing the entire uPVC handle mechanism and door handle repair lock. This will not only resolve the issue of sagging, but it will also ensure that your handle is fully functional and secure. It is important to remember that this isn't a simple or inexpensive solution. It will involve the removal of the current uPVC handle and replacing it with an entirely new assembly. It's also worth mentioning that this is only suitable for those who have a double glazing with a spring-loaded door, as the door handles repair near me will have to be re-drilled. You can also purchase a set of handles with springs that are built in. This will save your time and money.

Can I fit an uPVC door handle onto an aluminium or timber door?

When it comes to choosing doors for your home door handle repair near me there are many factors to consider. Upvc doors are durable as well as security and energy efficiency whilst aluminum doors are modern and attractive. In terms of the design of the door you're planning to install the appropriate handle is vital. If you're looking to replace your existing handles or add new ones, it's crucial to select the appropriate handles for your home. Our uPVC replacement door handle guide will assist you to make the right decision and install it with confidence.

Switching the handle on a uPVC door handle repair near me handle is simple and requires only a few tools. First, you will need to remove the handle that was previously in use. This can be accomplished by unscrewing the screws that hold it in place using the screwdriver. Once the screws are removed, you can remove the handle from the door.

The next step is to take a measurement of the door handle. You'll need to find the middle of the fixing holes on the backplate. This is often referred to as PZ measurement. It determines the handle spindle size. Once you know this information, you'll be able to buy a replacement door handle that is the right size.

There are many different types of uPVC handles that can be found to meet your requirements. Some handles are made with additional security features such as anti-drilling and cylinder guards as well as mole grips. These uPVC handles can be incorporated into uPVC or aluminium doors, and are perfect for homeowners who want to increase security for their home.

There are also uPVC handles that are more traditional. These can be found in a variety of finishes including black, chrome and gold. They're generally more expensive than standard handles, but will provide an attractive finish to your door.

It is essential to verify the dimensions of the uPVC handle prior to ordering. You will need to check the dimensions above, along with the keyhole and lever dimensions and the backplate mounting centres to ensure that your new handle is the right fit for your door.