conservatory sliding door repairs Door Lock Repairs

Conservatory door locks play an important part in the security of your home. It's vital that you get in touch with a locksmith as quickly as they start to fail.

Fortunately, most conservatory door lock repairs are quite simple and simple to complete. The most frequent problems are:. Floppy handle hinges, sagging hinges mechanisms and locking issues are some of the most common problems.

Damaged or Faulty Locks

Securing your conservatory door Lock repair doors properly should be the top priority. If you discover that your lock is damaged or conservatory door lock repair malfunctioning seek out an expert to have it repaired as quickly as you can. This will help prevent any potential break-ins or damage to your property.

Make sure the hinges are checked first to determine if the lock isn't functioning as it should. It is possible that you need to tighten them to prevent the door from sliding. If this doesn't solve the problem, then there may be a problem with the latch or bolt which needs to be replaced.

A common problem is when your key won't turn inside the cylinder. This can be due to a variety reasons such as dust or dirt that have accumulated in the lock. If this is the cause, you can clear away any debris and apply a oil-based lubricant to help the mechanism move without restriction.

It is possible that your key is misaligned and is not turning in the cylinder. This is more common with older locks that have suffered lots of wear. In this instance it's best to delegate the repair to a professional who will perform a thorough evaluation of the issue and then fix it.

If your uPVC locks are damaged, you may have to replace the entire mechanism. This can be a daunting task and should only be undertaken by a trained professional. To do so you must remove the handle, disassemble the handles and spindles, and wiggle out the mechanism. You should then take measurements of the main dimensions of the mechanism to ensure that you purchase a new one that will fit.

Finally, your lock may not be able to open or close due to a malfunctioning multipoint locking system, or a security hook or bolt that has jammed. This is more likely to require the expertise of a professional locksmith and will usually involve taking apart the entire lock.

Sagging Hinges

Many door sag problems are caused by loose frame screws or hinge screws. The tightening of these screws will likely resolve the problem however, if it doesn't the next step is to put in reinforcements to ensure that the hinges stay in their place. You can use wood veneers, pennies, popsicle sticks or even a thin piece of cardboard to fill in the gap between the frame and hinge. If you are unable to find the right material to fill the gap, you can use longer screws. They will be able to penetrate deeper into studs and will provide more support.

Once you've inserted your shims, screw the hinge back into position. Tighten these screws a few turns at a time, but be cautious not to over-tighten and cause damage to the frame or hinge. Check the door to make sure that it is closing and latching correctly. You can add another hinge after you've resolved the sagging problem. This will distribute the weight more evenly and prevent any further issues.

If the sagging happens because the jamb is misaligned, you can use longer screw to tighten the jamb. To do this, you need to remove one of the screws from the lock side of the hinge and replace it with a longer screw that extends into the framing. Repeat the process with any screws that remain on the hinge.

Another potential issue is that the strike plate may be placed in an incorrect position. This could cause the frame to be pushed against the door, creating scratches and making it difficult for latches to grab. You can smooth the edge of strike plate with an orbital sander or hand sander.

Floppy Door Handle Mechanism

Over time the screws that hold the door handle mechanism can loosen. This could cause it to feel loose. This isn't only annoying but can be a security risk as it could indicate that the internal mechanisms aren't working correctly to prevent your home from being entered. A floppy handle could be difficult to lock since you may need to apply extra pressure.

This is usually a simple fix. Find the screw that holds the barrel part of the handle and tighten it. You could also try loosening the screws to check if this helps to align the handle to an upright position.

It is also possible that the spring within your uPVC handle requires to be lubricated. This is a simple task that can be accomplished with some household grease or WD40.

After you've removed the door handle and taken it apart, you will be able to determine if there are any loose or missing screws. You can tighten loose screws using a screwdriver or replace them if damaged or broken. Afterwards, you can clean the screw heads and apply a cloth with alcohol to remove any residues from oil. Then, you can apply a threadlocker to the screws to ensure that they remain securely in the correct position.

In certain situations it is possible to replace the entire uPVC door lock mechanism. In this scenario, you must use a set of handles that are approved by the manufacturer. For example a Sold Safe SS301 or a Kitemark 2*. This will ensure that your conservatory remains as secure as is possible and can prevent break-ins.

A locksmith who is certified can service your locks regularly. This will keep them in good shape and decrease the likelihood of developing damaged components. It is also recommended to upgrade your handles and locks to a higher security level while you're at it. This will stop the entry of anyone who is not authorized, and will improve the security of your family and you.

Locked out

You may be locked out if your key turns and spins inside the lock but the door will not unlock. Call a professional before you attempt to alter the lock. They will be able gain access to your door without damaging it or the lock and will have replacement conservatory door handles locks available in stock. This issue could be caused by a door which is not properly aligned. The hinges can be adjusted to correct this. Sometimes, this problem is caused by a damaged lock that needs to be replaced.

Do not try to open your conservatory door with force, as this could cause damage to the lock and mechanism, causing you to be locked out!