UPVC Replacement Door Handles

Over time the handles on your doors will get worn out and need to be changed. It is essential to keep the same dimensions as the handles that were previously used when replacing them.

The three measurements to check are the top screw position, lever and key hole sizes. Check the size guide for help with this.

Inline Lever/Lever

A lever/lever handle is a modern door handle designed to work with new or replacement doors. This style of handle is available in a variety of styles and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever door handle repairs near me Handle

The handles of uPVC/Composite are constructed of tough materials and are ideal for multi-point lock doors that require a strong design. The handles are inline and work with the same spindle as well as screw fixings. They can be easily incorporated into existing or new uPVC/Composite doors.

The design of the sprung lever allows the handle to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been endurance tested to 200,000 cycles, this allows for the assurance of the quality of the finish and the performance of the handle over time. The sprung lever is adjustable to fit a wide range of locks. This is useful in doors that are narrower, where the cylinder is situated further back in the door. A shortened lever can also be used for doors with a latch which can be operated with the thumb inside.

Lever Pad

The lever pad upvc handle differs from the lever handles found on most doors. The handle can use a single spindle (inline) or independently from both sides using two offset or inline spindles (pad). They are generally employed on repair upvc door handle double glazed doors and come in many variations & finishes.

The handles are available in a variety of finishes including White, Chrome, and Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle an outstanding performance and durability to serve the purpose it was designed for.

All UPVC handle lever pads include a spindle and screws, and can be fitted on the uPVC door. The 211mm backplate fixing centres allow for a larger size handle that can be beneficial in replacing a defective or worn multi-point door lock mechanism. The handle levers come with springs, which can solve the issue of door handles that move out of their horizontal position when not being used.

When choosing a replacement UPVC handle and spindle, it is important to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement can also be called 'handle centres' or cylinder centres'. It is important for matching the correct handles.

After you have identified the correct PZ size it is important to ensure that the push and lever pads are designed to fit the American with Disabilities Act compliant handles that you need for your door. These are typically round or square with an internal lever and an external push pad.

Most of the UPVC lever pads we offer are sprung, which means that they return to their horizontal position when they are not in use, instead of hanging out and possibly securing in the frame. This stops draughts and cold air from entering a home door handle repair near me. It is also the case that the majority of the UPVC handle lever pad style handles are hand-operated, front Door handle repair allowing you to install them on either side of the door.

Euro Cylinder

Cylinder locks can be found on uPVC and other types of doors. They work by using a key to unlock a cylinder that is then revealed with pins that can be aligned to those in the lock body, allow them to rotate the cam, thereby opening the door. Euro Cylinders can be fitted with up to six pins, with external and internal doors generally requiring different levels of security.

The choice of cylinder you choose is vital. It's dependent on the amount of use your doors and handles receive. For instance, doors that are external should be fitted with a higher security cylinder, while doors inside can be secured using the standard cylinder. Additionally, certain cylinders are available with extra features that increase security, for instance anti-drill or anti-bump features.

A euro cylinder should be properly measured to ensure it is the right size for your door handle lock repair. The cylinder needs to be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn if there is one. It is recommended to do this while the lock is in place however in the event that this is not possible, you may remove it to take measurements. A cylinder that extends beyond the handle and escutcheon may be vulnerable to attacks, such as snapping locks, therefore it is important that it is not too long.

Most newer cylinders have been constructed with bump and anti-drill features built into their design. They are designed to minimize the chance of attack by forcing cylinders to turn in a new direction. This can help prevent attacks and ensure your doors are secure.

There are also cylinders that have been designed to resist snapping. This is a more frequent type of attack on cylinders, which is where the break line of the lock is smashed with a special tool to snap off the front Door handle Repair of the cylinder to allow the door lock handle repair to be opened. This is faster and more straightforward than opening the door with multipoint locks. It also leaves little evidence of a break-in which can hinder the insurance claim.

Spring Cassette

The spring cassette is positioned within the base of the door handle backplate, providing a spring solution to return your multipoint lock handles to their original position after using. The handles had no spring and would droop when the locking mechanism was removed. This simple component is the best way to solve this issue. It also stops your door from getting stuck in either the closed or open position since they aren't easy to close manually.

These spring cassettes are specifically designed for use with sprung multipoint locks but they won't work with unsprung multipoint handles and you must have a bespoke hole cut into the backplate to allow them to fit (please check the image for a technical diagram). These cassettes can be used as a replacement to damaged or missing cassettes on the backplate of uPVC door handles. They are available as one unit. They come with a square cut out that is able to accommodate an 8mm shaft.

These spring cassettes are a fantastic cost-effective solution to the issue of your door handles that are sagging. They are simple to install and will increase the lifespan of your uPVC doors. For more information on our selection of uPVC spares and accessories please feel free to get in contact with our team. We are here to assist and offer professional advice.