Patio Door Lock Repairs

Over time, patio doors go through wear and tear that can result in locks that fail. However, there are simple and effective ways to restore your uPVC patio door's security.

These simple fixes will make your home safer regardless of whether you re-align the lock or clean the locking mechanism.

Clean the Lock

While patio doors are a great option to let in the outside and keep the elements out, they can also be security risks when your lock isn't functioning as it should. As time passes wear and tear cold and hot weather dirt and debris could take their toll on your patio door repair door's lock and make it difficult to open. With some minor maintenance you can make sure that your patio door's locks will always perform correctly.

It is important to first clean the patio door lock and all moving parts. This will help get rid of any grime or coatings that might be hindering the lock from working properly. Begin by wiping down all the moving parts on your patio door lock using a damp cloth. Then, use a scouring cloth or rough damp cloth to scrub the dirt-infested parts of the door and frame. Then wipe the lock with a dry cloth to get rid of any moisture. Allow it to air-dry before using it.

If you have a patio door that uses pin tumbler latch mechanisms You can lubricate the lock by applying powdered graphite to the key or by using a lubricant made of Teflon, such as WD-40 Multi-Use Product. This type of lubricant can be easy to apply and doesn't break down over time. If you're unable find the correct lubricant for your lock, make use of a pencil with a more of a thicker tip. Put the pencil in the lock, then shake it to distribute the graphite.

Regular maintenance is also essential to keep the tracks of sliding patio doors clear from dust, dirt and debris. These tracks are especially vulnerable to snow and ice, which could cause them to become stuck or slack, making it harder for your patio glass door repair near me doors to open and close.

Sliding patio door track rails and rollers can be cleaned by removing damaged or dirty weather stripping, cleaning them, then reinstalling it. The same applies for rollers on patio door repair company doors, which can be wiped down and then sprayed with a non-stick lubricant that will allow them to move freely.

Lubricate the moving parts

uPVC French Doors, like sliding patios, https://slimex365.com/patiodoorlockrepairsnearme256834 are operated by using 3 to 4 or sometimes, 5 points locking mechanisms. This includes the lock cylinder and handle which is operated by the key. They also require maintenance, and specifically lubrication of the moving parts. This can be accomplished using a thin oil (never WD40) and should be done once per year.

If sagging hinges aren't a reason, the door could be skewed and catch or hitting the strike plate's hole in the frame. Remove the strike plate, and employ a sharp tool to enlarge the mortise. This will allow the latch to fit into the hole, and prevent it from scratching against the frame.

While the cylinder is out of the way take a measurement of its width using an object or a piece of wood that can fit into the gap between the adjustment screw and the lock. The outer dimension is the distance from the outside of the door to the middle of the cylinder, and the inner measurement runs from the center of the adjustment screw to the end of the cylinder.

Verify the lock's width

If your patio door latch isn't able to turn, even after cleaning and lubricating, it's possible that it is out of alignment with the strike plate hole. Make sure that your door is properly balanced and if the hinge screws are in good condition. In many instances, moving the strike plate upwards or downwards can fix the problem.

Most of the time, the issue occurs when the strike of the lock is too small for the latch to engage. In this instance you'll need to expand the hole using the hammer or chisel and then test the latch to ensure that it is able to engage the strike plate in a smooth manner without rubbing against or getting caught on the door's frame jamb.

It is important to identify the type of mortise lock you currently are using before you purchase the replacement. This can be done by looking at the faceplate and determining if it is square or round. Then, [Redirect Only] take a look at the screw holes on the current lock and note the size of each. This will aid you in finding an alternative that is the same width and will fit perfectly into the hole you have already.

In addition to identifying the current mortise lock you'll also want to inspect it for any bends or scratches that may need repairing. A damaged or bent latch is more prone to break than one that hasn't been utilized often, so make sure to replace the lock with a brand new secure and safe version in the event you notice any signs of wear or damage.

After you've examined the lock and determined which kind of replacement you require, it's time to start working on the actual repair. The spindle and handle must be removed from the patio door. Introduce the new handle. Start by installing the inside handle. Align it with the spindle and then secure it into by using two screws or bolts. Once the handle in the interior is in, install the handle on the outside and screw it into place, too. Once you have completed these steps Test the handles to make sure that they open and shut easily and that the latch works correctly with the strikeplate.

Check the Door's Strike

The strike plate and door latch are two pieces that work together in order to lock the door. If they are not aligned properly and the latch doesn't latch the door shut properly. Fortunately, this problem is usually simple to fix.

First, examine the strike plate's receiving holes to ensure they are clear of obstructions, such as dirt or plastic plugs. Remove the screws that hold the strike plate. This allows it to move vertically but it will not be able to separate from the frame. Then adjust the strike plate so that its receiving holes align with the latch hooks on the door latch. Once the strike plate is adjusted tighten the screws, and then test the door to determine whether it locks smoothly after the new adjustment.

These plates are difficult to reach for homeowners with sliding patio doors. However they are vital to secure and unlock your door. These plates are usually placed on the top and bottom of the door jamb, which is where they are used to support the door's latch. The door latch slides into the strike plate and forms the seal. If the strike plate is damaged or rusted, or if it is not properly installed, the latch may not properly lock the door.

The most common reason for an outdoor door lock to not close or not close is a misalignment between the latch and strike plate. The most effective way to test for this is to perform the "lipstick test." Rub some lipstick along the edge of the deadbolt, then put masking tape on it. The lipstick will leave the mark when you close the door. This will reveal exactly where the latch meets the strike plate. If the mark is too high or low you can adjust the strike plate.

If your patio door locks for sliding aren't working correctly they could be a problem in keeping your home safe from burglars. It is imperative to resolve this issue as quickly as you can. Follow these easy steps to fix your patio door lock and restore its functionality.