Cat flaps let your cat leave and come back whenever they want without having to let them in or out. They also can help to stop your cat from urinating inside the house.

It is easier to install the cat flap on a Upvc panel than on a glass one but you'll need some skills and fitting Cat flap In upvc door panel the appropriate tools.

Take a measurement of the door

The installation of a cat flap inside a door can be tricky but if you use the correct type of cat flap be patient and follow the instructions provided it should not prove to be too difficult. We will demonstrate how to draw the shape and then use the jigsaw to cut the door's area. Then we will finish the job by attaching the cat flap. This will ensure that the flap remains in place and shields the doors from the damage caused by wind and rain.

The first thing to do is measure the width of your pet to get a precise measurement of what size of cat flap you'll need. This will ensure that the flap is large enough to let your pet go inside and out of the house without needing to open and close the door each time, but also small enough to stop them from moving too far in either direction.

Once you have the measurements, you can mark the location on the door where the template should be placed, usually, this is done using an X, but some kits come with an illustration that outlines where to drill, if you have one, then attach it to the door and use a pencil to draw around it. If your door has a sill or moulding at the bottom, Fitting Cat Flap in upvc door panel be sure you leave plenty of space between your cat and the moulding or sill.

Then put on your eye protection and a dust mask, and using a jigsaw start to cut along the line you penciled in. Don't push the blade too hard, as this could make it cut faster than you want it to. If you have a square that you have cut, make use of it to verify that you are cutting correctly and also to ensure that the hole is in a rectangle shape, once you are happy with this you can begin to remove the remaining door material.

Draw a Line

The cat flap is a great way to let your pet out and in without having to worry about them coming in with a visitor, or leaving unwanted gifts inside the house. It also reduces drafts and helps keep the temperature in your home in a stable manner. However, fitting cat flap in upvc door panel the cat flap to your door can seem like an overwhelming task for those who haven't done it before. This can lead many people to call an expert joiner or carpenter to do the job instead. While this is certainly an option, it is possible to do the work yourself if you own the appropriate tools and follow the instructions carefully.

Although this is much easier to do with a wooden door, it is still possible in uPVC doors with cat flap - although you need to be very cautious not to damage the doors, as this can end your warranty. The first step is to measure the door to make sure it will accommodate the new cat-flap. If you have an ordinary uPVC panel it's easy. However, if your door is made of composite or another kind of door, you may require more care.

The next step is to determine the size of your cat's belly. This is the measurement from the floor to the underside of the cat's stomach and you will need to find a spot on the door that will be within the range that your pet can comfortably go through. Once you have this information, you will be required to mark the area using pencil and a spirit level to be certain that the hole you create will fit your cat.

Once you've marked the area, you're now ready to cut the hole. It is essential to take your time and use a jigsaw to ensure that the cuts are clean and smooth not uneven and rough. This could damage your door. You should also remember to wear safety glasses and a dust protection mask whenever working with the jigsaw as breathing in the dust could be hazardous to your health. After you've finished the cutting, you will need to smooth out the edges of the hole using sandpaper so that your cat flap can be fitted easily into place.

Make a hole

Getting a cat flap fitted into an existing door panel or double glazing sealed unit can be difficult. You may be tempted to do it yourself, but unless you have experience with DIY, it's probably best to get an expert to complete the task for you. A mistake could not only be ugly and unattractive, but could also be a security threat. It could let cold air to enter when the cat is outdoors and hot air to escape when the cat flap installation bristol is inside.

Mark the hole position on the door with the help of a pencil and a spirit level. This will ensure that it is properly positioned and runs flush with the rest of the door. You should make sure you have some sandpaper on ready for any rough edges.

Wear the safety equipment you'll need to use an electric tool. If you are worried about the sound of the jigsaw, consider buying an electric version that is quieter and simpler to use.

It is best to only remove the material needed to fit the flap. A small amount of material will be needed to cover the thickness of the wall of the flap but cutting off more than this can cause problems or cause damage to the door frame.

A upvc door may include a metal frame, or panel that will interfere with the microchip cat flap, and in this case you'll need to cut an oversize hole so that the metal does not touch the wall of the cat flap, if this is done it is crucial to fill in the oversize gap and seal it with water.

If you're planning to install a cat flap into a double-glazed or upvc window with frames made of metal you'll need to talk to a specialist. They will offer you a brand new piece of glass with the hole already made for the cat flap. It is cheaper to do this than to attempt to fix the flap to an existing pane of glass that was not designed specifically for this purpose.

Place the Flap

cat flap installation bristol flaps allow your pet to move around at their own pace, giving them the freedom to lounge in the home whenever they want to. However, if you have an uPVC door, it might be difficult to fit an animal flap, especially if you don't own a glass pane that can be cut to fit one. If you're willing to purchase and install a new half-glazed uPVC panel then it is possible to fit an animal flap onto these doors. It's not as easy as just making a hole in the door however, and there are a few things you'll need to take care of first to ensure that it's safe.

A uPVC, GRP or composite door panel is typically made up of a flimsy plastic outer skin bonded to a soft polystyrene core that is insulating. The material is extremely fragile and care should be taken when cutting through it to avoid damaging. This type of door typically comes with a template drawing which you can use as a guide to cut the hole in your door.

Once you've marked the hole in your front door, it's time to put in the cat flap. You can pick from a range of designs, from simple push-button flaps to microchip activated ones that allow only your pet to enter. Whatever kind of cat flap you pick it is essential that your cat is able to use the flap comfortably without getting stuck outside in bad weather.

It's a good idea select circular fittings instead of one that is square, since circles are more securely cut into door glass. It's because square holes are more likely to crack the glass when drilled. It's also a safer option to use as you don't risk having to drill into toughened glass that may break and injure your pet or your family. This is especially crucial if you have elderly or children at home who could be injured by glass shattering.