Ghost 2 Immobiliser

autowatch ghost 2 immobiliser is an wireless security system that protects your car against key-cloning and hacking. It connects to the ECU unit via the CAN data network. It's quiet and cannot be detected by thieves.

You can only disable it by entering an appropriate button sequence (like PIN code) you have programmed into your car using buttons on the steering wheel and center console.

Protects Your Car from Theft

Car theft is on the rise, and cars are taken in a matter of minutes. It is essential that all car owners consider the extra security measures they can adopt. An immobiliser is one of the most effective and most dependable methods to ensure your vehicle's security. Ghost immobilisers are a great option because they are small, hidden within the wires of your vehicle and do not emit any radio frequency signals. They are therefore not traceable and can be put in without having an impact on the CAN bus system of your vehicle.

In contrast to other immobilisers that depend on keypad input, tags or a specific sequence of buttons to disarm them, our ghost immobiliser near me can only be disabled with the exact pin code that was created by us at the time of installation. This unique disarming sequence uses buttons on your steering wheel, doors, or centre consoles to stop anyone from driving away your car. This prevents thieves from cloning your key or using a jamming/spoofing devices that disable standard car immobilisers.

A ghost immobiliser prevent your car from being driven, but it also stops the car from being taken to make parts. This is a growing problem in the UK due to the growing popularity of these types of cars and can happen in as little as one minute. TTW's ghost immobilisers can be easily programmed to guard your vehicle from these types of attacks.

Installing our Ghost 2 immobiliser can stop your car from being taken at a service station, or even if your vehicle is being driven around the garage by employees. The ghost 2 immobiliser cost can be set to Service/Valet Mode which will only allow you, the consumer to select a unique button combination.

If you'd like to know more about our ghost immobilisers or want to have a free quote, contact us today. We will be happy to assist you and give you peace of mind that your vehicle is secure throughout the day.

There is no LED or key fob to indicate its whereabouts

The non-detectable car immobiliser works with your car's CAN network to guard your vehicle from the newest kind of car crime. Unlike other aftermarket CAN immobilisers, Ghost does not rely on key fobs or LED indicators to function instead it makes use of buttons found in the standard factory controls that are already within your vehicle like the ones on the steering wheel, door panels, and centre console. This means a hidden pin code is generated that must be entered prior to when your vehicle will start, making it completely undetectable to thieves.

The CAN-BUS device makers have also included additional security measures to prevent the device being hacked or bypassed. It also provides CAN-BUS blockage and a physical immobiliser cut, which means that even if your keys get stolen, the criminal will be unable to leave with your joy and pride.

It's simple to install the CAN BUS immobiliser in your vehicle and it only takes around 30 minutes. We will send one of our staff in your area to set up the time and place that is convenient for you. After your vehicle has been fitted, you will be given an identification number and security codes for your phone as well as the app will make it simple to use and ensure you are always in control of your vehicle's security.

The system is compatible with most modern cars, but should you own a vintage or special-purpose vehicle, please contact us to check compatibility. The supply and installation price of The ghost car immobiliser immobiliser - web - 2 is APS449 and your vehicle will be added to the International Security Register if fitted by one of our approved installers. Don't hesitate to contact our friendly team with any questions. We're looking forward to receiving your call soon.

Easy to Setup and Programming

Immobilisers are a feature of many modern vehicles to prevent theft or hot-wiring. Immobilisers are more effective than physical deterrents, such as locking your steering wheel and wheel clamps because they are built into the vehicle.

The system is directly connected to the CAN data network in your vehicle. It stops it from running until you enter the unique code. The device is small and sealed, so it can be installed anywhere within your vehicle without any the need for additional wiring. It doesn't emit radio frequency signals, so it can't be detected by scanners or other code-grabbing equipment.

Ghost uses the buttons on your steering wheel, door panels and the centre console of your vehicle to create a customized (like a pin code) disarm sequence that must be entered in order to start your car. The pin code sequence can be changed at any time and is dependent on four to twenty button presses. You can even put your vehicle into Service/Valet mode to ensure that it can be operated, but the car is not able to start or drive. This will ensure your car is secure when you bring it in for servicing or valet parking and ensure that the mechanic doesn't have access to your pin code in order to deactivate your system.

If you are away from your vehicle for a long period of time for example, on business or vacation or on a business trip, you can use our app to get temporary pin. You can manually enter your pin while driving the vehicle.

Our CAN bus immobiliser can also be compatible with a remote keyfob or tracker. (Brand dependent) This gives priority to the ghost system. This is a great option for additional security in the event that your vehicle is stolen or if you lose your keys.

If you're looking for a method to safeguard your vehicle from key-cloning or hacking contact us now to find out how we can help. We provide our services across the UK and also at our installation center in Derby.

Service/Valet Mode

Modern vehicles come with sophisticated stop/start eco systems that require the correct inputs for proper functioning eg battery voltage and temperature, engine temperatures and what electrical systems are active. Sometimes, these can cause issues and are often difficult to determine if it is ghost immobiliser for sale related or not. This is especially the case if your car has recently been serviced or valet-parked. If this is the case, you can go into the ghost car immobiliser service mode, which allows the vehicle to be driven and start up without the need for a pin. This can be helpful when your car is being inspected or parking at an independent garage.

Press the button for service five times to enter service mode. The indicator light will flash twice to signal that service mode is entered. It is possible to exit service mode at any time by entering a PIN code. After you have gotten out of service mode the Ghost immobiliser will resume normal operation.

This is a discreet system that communicates with the vehicles ECU on the CAN data circuit, and connecting directly to the original vehicle buttons & not using radio frequency signals like other immobilisers. This makes it almost impossible for any other device or hacker to bypass the system. Even devices that disguise codes from the original key fob won't be able to affect this.

It is an TASSA certified anti-theft system that is in compliance with the highest standards of protection. This includes a unique vehicle marking system linking to the international security register that is an insurance company requirement.

The ghost immobiliser has a very small form factor and is easily hidden in the wiring of your vehicle's factory and is nearly impossible for thieves to locate. It is a sealed device that is so small it can be installed in a variety of different locations of the vehicle, including under the dashboard or on the steering wheel.

The system makes use of buttons in your vehicle such as those found on the steering wheel, door panels or the centre console, to allow you to create a unique and changing disarm sequence of up to 20 presses that must be completed to start your vehicle. Anyone with your unique pin code can use it - so your family members, your colleagues or friends can use it.