Ghost 2 Immobiliser Problems

It is designed to safeguard vehicles from key cloning and hacking to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that can be fitted without damaging your vehicle. It stops you from starting your car unless you enter the correct sequence of buttons in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by stopping the engine from starting until it is issued the correct PIN code. This is done without altering the vehicle, and is largely undetectable by thieves. The unit is directly connected to the ECU via the CAN databus in order to disable a vehicle. This system is similar to that used by car manufacturers for years. However, thieves are unable to overcome it using a brand new key, or key relay technology, as they could with factory fitted systems.

Ghost Ghost can be fitted to any car, van, motorhome, caravan or bicycle with an engine. It's compatible with all popular makes of vehicles. The same system can be used on electric cars. It is an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is armed it will block all the buttons in your car and stop the ignition from starting without a PIN code having been entered first. This can be accomplished using the Android or Apple mobile apps or by manually entering the code via your key fob. If a code that is incorrectly entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great deterrent, and when the vehicle isn't started the thief will continue to pursue a new target.

The Ghost is tiny weatherproof device that can be concealed in the most difficult to access areas of your vehicle. Installation takes between 20 and 30 minutes for each vehicle. It is also easy to remove should you decide to move your vehicle around or give it away for valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognised by a few insurance companies. It is also equipped with an emergency Pin Code override and features the Service/Valet Mode which can be activated by pressing a button on the app or with your key fob.

Disarm

Contrary to the mechanical devices, which can be removed Ghost immobilisers are hidden and integrated into the car. Even if they were found in the car, thieves wouldn't be able start the car. They are nearly impossible to hack or bypass. This is because a ghost immobiliser blocks key blocking, signal jamming, and device spoofing - techniques that are frequently used by thieves to gain access to vehicles with standard immobilisers.

The immobiliser transmits a code to the ECU. If the wrong code is sent the vehicle will not be started as the engine will not fire up. It is possible to disable a ghost immobiliser with an application program, but it is very difficult and time consuming to accomplish this. The software must be installed and used by a authorized installer.

The Ghost immobiliser, a small device, is hidden in the wiring loom of your vehicle. It is invisible to the naked eye once installed. It will not show up on diagnostic systems, there aren't LED indicators, and it does not connect to the engine through the OBD port. It communicates in silence through the CAN data loop.

The system will block the vehicle from starting unless it is given a specific PIN code sequence. The code is entered by pressing buttons on the steering wheel or door panels, or centre console. This how much is a ghost immobiliser (navigate here) a safer way to protect your car as it does not require the use of keys or a remote control.

In addition to this Ghost offers an option for service that can be activated through the application on your mobile phone. This allows you to give your keys to someone for valet parking or servicing without entering the disarm sequence.

No matter if your Ghost is in service mode or not you should never attempt to remove the system by yourself as it can affect your engine and cause damage. It is recommended to speak with an installer certified by TASSA who will safely and properly remove the system. Our latest GHOST immobilisers include a special fingerprint QR sticker that is hidden in different parts of your vehicle. They are linked to our security register. In the event that the system is removed and then is sold on the blackmarket this will allow you to trace the original owner.

Anti-Hijack

The anti-hijack function is an essential feature of the Ghost Immobiliser 2. This is a clever key that protects your car from theft. The Ghost system will automatically activate the hazard light and stop the engine when the ignition is on and the vehicle is in a stationary position. This gives the driver and passengers time to press the hidden security button before the system can be activated.

In contrast to other systems that simply stop the engine when the ignition is switched to on The Ghost system has a unique controller and timer that will close the valve for cutting off fuel 14 when it is activated after a set period of time, even in the event that the ignition is in operation! The delay time frame must be long enough to allow the victim of the vehicle to move away from the scene of the robbery and sufficient distance from the vehicle that is stalled before the system can be activated.

In addition to the standard CANbus immobiliser blocking features of the Ghost, it has an extra security feature that blocks common hacking techniques employed to gain access to modern vehicles, such as relay attacks key range extending, key range hacking and ECU swapping. The Ghost system communicates in a non-intrusive manner and does not emit signals that could be detected by thieves with code-grabbing technology or RF scanning.

The Ghost system also features a Service / Valet mode that allows your vehicle to be started temporarily and driven without the need for an PIN code. This is great for those who park their car and only need to leave it for a brief time in order to open the garage door or place groceries in the boot. The system will then exit the service mode according to speed and time or by a simple PIN code input process. This will give you complete security that only YOU can drive your car!

Keyless Entry

With the growing trend in theft of cars using contactless technology Many customers are seeking out additional security options. This is especially relevant for those who have invested time and money into customising their car or own expensive automobiles. A supplementary immobiliser is an affordable method to stop this type of theft as it can stop your vehicle from starting until the correct pin code is entered into your key fob.

Immobilisers are made to block a variety of vehicle circuits, including ones that control the starter motor and fuel pump. They also can shut down the car alarm to draw attention and scare off any potential thieves.

These devices connect directly to the engine control unit using the CAN data network and prevent the thief from bypassing it by installing a replacement ECU or using key programmers. These immobilisers are put in place in a discreet manner and leave no trace on your vehicle. They are also not detected by hi-tech thieves' tools.

The Ghost immobiliser is unlike other systems which require the driver to carry an app or tag. Instead, you are able to select your personal pin sequence by pressing a pattern on your steering, door panel, or centre console. The pin can easily be changed, making the device as secure as a credit card. It's also more difficult to crack because it takes up to 20 press.

Ghost also offers Valet/Service mode, which permits you to deactivate it if you plan to hand over your vehicle for valet parking, or for service. This allows the system to operate within the parameters, such as a 30-mph speed limit. It can then be reactivated using the original key or the corresponding entry code.

Installed by our reputable installers and certified installers, it is the most secure and effective aftermarket CAN-immobiliser available. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels and an ISR contact cards containing your unique QR codes, and an emergency code that is safe. They are all stored in your purse or wallet.